Blum Undermount Drawer Slides Instructions

Page Background

Center line of Cabinet Opening

Screw and Pilot Hole

Location (4) Places

Fold Template along this edge to fit

cabinet opening.

Front edge of paper

to front of cabinet

(or front of face frame)

Fig 1

T-Nut Screw for

Tilt Adjustment

Lock Nut

12400Earl JonesWay

Louisville,KY40299

rev-a-shelf.com

Customer Service:

800-626-1126

8" SOFT-CLOSE PULLOUT WITH BLUM TANDEM SLIDES WITH BLUMOTION

TOOLS REQUIRED:

30 MIN

ESTIMATED ASSEMBLY TIME:

CARE AND MAINTENANCE:

Clean with a damp cloth and

wipe parts dry.

PARTS LIST

- Frame/Slide assembly

- (4) #6 x ½" flat head screw

- (4) #8 x ¾" deep thread pan

head screw

- Template

- Adjustable Rub Bushing Kit

Attaching slide to cabinet

1) Using the mounting template locations, pre drill 4 holes using a 3/32" drill bit.

2) Remove template and attach the slide assembly to the floor of the cabinet using (4) #8 x ¾" deep thread

screws provided.

3) With the slides in the fully closed position, place the frame on the slides and push back until you feel the

slides engage the locking devices (you will hear a click sound). Fully cycle the frame a few times.

Attaching the cabinet door

Loosen the (4) lock nuts (3/8" wrench) inside the front wall of the unit. (See Fig 1)

Pull the Adjustable Door Mounting Brackets to ensure that you are mounting to the "thick" portion of the

cabinet door. (Front of pull out should line up with front of face frame).

Use the (4) #6 x ½" flat head screws provided to attach the door to the pullout unit.

If the door needs to be tilted to lay flush against the face frame, loosen the 8mm nuts and turn the "T-Nut"

screws so that it pushes against the metal bracket. Each corner can be adjusted independently. (Note: It is

recommended that door bumpers be used on each corner to ensure quiet operation)

Install rub bushings using enclosed kit and instructions (Note: Chassis may need to be removed for proper installation)

T-448SC-1116

For Kits, BPP12L, BSR9, BSR12, BCPO12,

BUPO9, BTFPO9, BTFPO12

BASE PEG PULLOUT CABINET

BASE CUTLERY PULLOUT INSERTS

BASE CANISTER ORGANIZER PULLOUT

BASE UTENSIL PULLOUT

BASE TRAY AND FOIL PULLOUT

226